![]() ![]() Insert a bolt B through the metal washer K, through the small canopy frame 15, and into the small canopy frame bar 16. ![]() Insert the small canopy frame 15 into the large canopy frame 13 as per drawing. ![]() Hang the “S” hooks from the loops on the short top crossbar 5. At each end of the seat assembly, bring together the holes in the top ends of the hanging bars and thread them on to a “S” hook N. Position the bars so that the end labelled “TOP” is up and facing toward the swing seat. 088-1682-2 Step 9 Attach the hanging bars 12 to the arms by sliding the bottom hole in the bars over the pins on the outside of the arms 7 and 8. Then securely tighten the bolts and nuts. Insert a bolt H (from outside to inside) through the bracket of the arm, through a plastic washer M, through the side bar on the seat and back, through a metal washer L and secure with a nut J. Line up the holes in the arms 7 and 8 with the holes in the side tubes of the seat and back 11. ASSEMBLY Unfold the seat and back 11 and lay it on top of the frame. Tighten all bolts and nuts from step 1 to step 5 by using the wrenches provided (except bolt A). Insert a bolt D through a metal washer K, through the side panel 3, and secure into the rear leg crossbar 6. 088-1682-2 Step 5 Place the rear leg crossbar 6 between the side panels 3. Attach a short top crossbar 5 onto the long top crossbars 4. 2 1 1 2 4 E Step 4 2 L Requires 4, 5, G, J, L. Repeat procedure for the other long top crossbar. For each hole insert a bolt E through a metal washer L, through the leg, and secure into the long top crossbar 4. ASSEMBLY Insert two long top crossbars 4 into the holes at the top of each leg. Make sure the arrow “↑ ↑” is pointing up. Attach the side panel 3 to 2 legs 1 and 2 by inserting a bolt F through a metal washer L, through the hole of the side panel 3, and secure into the leg 2. ![]() A ASSEMBLY Insert a bolt A through the U-shaped bracket O, and secure into the leg top 1 or 2. Compare parts with packaging contents list. Before beginning assembly of product, make sure all parts are present. IMPORTANT: Please read and understand this manual before any assembly. Contact us for assistance we’re here to help. CALL US FIRST! 1-88 If you have questions regarding your product, require warranty assistance, or have damaged or missing parts, please call our customer service toll-free helpline. PARTS LIST 3 1 15 Leg post - 2 Small canopy frame - 2 2 16 Leg post - 2 Small canopy frame bar - 1 3 17 Side panel - 2 Cushion - 1 4 18 Long top crossbar - 2 Pillow - 2 5 19 Short top crossbar - 2 Large canopy - 1 6 20 Rear leg crossbar - 1 Small canopy - 1 7 21 Right arm - 1 Net - 1 8 22 Left arm - 1 Throw pillow - 2 9 A Front seat support bar - 1 M6*12 bolt - 4 10 B Rear seat support bar - 1 M6*25 bolt - 2 11 C Seat and back - 1 M6*30 bolt - 4 12 D Hanging bĪSSEMBLY PREPARATION 5 Let us help you! DO NOT RETURN YOUR PRODUCT TO THE STORE. You may adjust the legs levellers as required to ensure that the item stands in a rigid position. When placing in the desired location, ensure that all legs are resting on the same surface. 088-1682-2 TABLE OF CONTENTS 2 Important Safety Instructions 2 Parts List 3 Assembly 5 Cleaning and Maintenance 14 Technical Specifications 14 Warranty 14 TABLE OF CONTENTS 2 Ensure that all parts are assembled properly and fully tightened as per the instructions. 088-1682-2 ASSEMBLY INSTRUCTIONS Toll-free: 1-88 IMPORTANT: Please read this manual carefully before beginning assembly of this product. VALENCIA COLLECTION Day Bed and Swing MODEL NO. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |